Furnace & Heating Replacement Cost in Aubrey, TX (2026)

Furnace & Heating Replacement Cost in Aubrey, TX (2026)

Replacing a furnace or full HVAC system in Aubrey typically costs between $8,000 and $16,000 installed for a complete system in 2026, with furnace-only replacements running lower depending on the unit size and whether ductwork needs attention. Prices across the DFW metro have edged up 5 to 10 percent compared to 2024, driven largely by new federal efficiency standards and the ongoing refrigerant transition to R-454B. If you are budgeting for a heating replacement in one of Aubrey’s newer subdivisions — Providence Village, Paloma Creek, or the growing communities along U.S. 377 — this guide covers what to expect, who serves the area, and what questions to ask before signing anything.

Quick Comparison

Best for Emergency Furnace Repair or Replacement

Air-Care Texas

When a furnace fails on a cold January night in Aubrey — and North Texas does get stretches of hard freezes — response time matters more than anything else. Air-Care Texas has been operating out of the Denton area since 1987 and offers same-day emergency service. For a family-owned operation with nearly four decades in the region, they have seen the full range of equipment configurations common to Aubrey homes, from older gas furnaces in established neighborhoods to the heat pump hybrids showing up in newer construction.

Best for Full System Replacement Experience

Air Repair Pros

Air Repair Pros has been active in North Texas since 1998, which means they have worked through multiple rounds of equipment transitions and efficiency standard changes — relevant context in 2026, when the R-454B refrigerant phase-in and updated SEER2 minimums are reshaping what gets quoted and installed. Their full-service model covers repairs, new installations, and seasonal tune-ups, which is useful if you want one contractor to handle both the furnace side and the air conditioning side of a whole-system replacement.

Best for Homeowners Who Want One Company for Everything

Milestone Electric, A/C, & Plumbing

Milestone has been locally owned and family-operated since 2004 and holds a BBB A+ rating, which reflects consistent follow-through on jobs and transparent billing practices. Their price-match guarantee and 24/7 availability make them a reasonable option when you are comparing multiple quotes and want a single point of contact for HVAC, electrical, and plumbing work — useful if your furnace replacement surfaces a related issue like a gas line or electrical panel concern. They serve North Texas exclusively.

Best for Certified Gas Furnace and Heat Pump Work

Airmax Air Conditioning & Heating

Airmax specifically calls out gas furnace and heat pump installation among their core services, which matters in Aubrey where both system types are common depending on the age and builder of the home. Their certified technicians handle residential and commercial properties, so they are equipped for the range of equipment sizes found across Aubrey’s mix of older single-family homes and larger new construction.

Best for Aubrey Subdivision Homeowners

RiteNOW and Eric’s Home Services

Two contractors are worth noting for homeowners specifically in Aubrey’s planned communities. RiteNOW, in business since 1980, explicitly names Providence Village, Paloma Creek, and Aubrey’s growing subdivisions in their service area, which signals real familiarity with the equipment and duct configurations common to those developments. Eric’s Home Services is veteran-owned, locally operated, and holds Texas HVAC contractor license TACLA87910C with full liability insurance. They offer same-day dispatch on most calls and cover residential and light-commercial work across Aubrey.

Frequently Asked Questions

What does furnace replacement cost in Aubrey, TX in 2026?

A furnace-only replacement in the DFW area typically runs in the range of $3,500 to $7,000 installed, depending on the unit capacity and any ductwork modifications needed. A full system replacement — furnace, outdoor unit, and air handler together — generally falls between $8,000 and $16,000 installed based on 2026 market conditions in North Texas.

Does Aubrey require a permit for furnace or HVAC replacement?

Most Texas jurisdictions require a mechanical permit for HVAC replacement, and Aubrey is no exception to the general rule. Permit fees in the DFW area typically run $75 to $250, and your licensed contractor is responsible for pulling the permit as part of the job — if a contractor tells you a permit is not necessary for a full system swap, treat that as a warning sign.

Are there rebates available for heating system replacement in Aubrey in 2026?

Aubrey falls within CoServ’s electric service territory, and CoServ offers rebates of $400 for qualifying central AC systems (SEER2 16 or higher) and $500 for qualifying heat pumps (SEER2 16 or higher). Confirm current eligibility requirements directly with your installer before purchase, as program terms can change.

Is the federal tax credit still available for HVAC replacement in 2026?

No. The federal Section 25C energy efficiency tax credit expired on December 31, 2025, and is not available for equipment placed in service in 2026. Factor that into your budget accordingly and do not rely on a contractor’s claim of a federal credit unless you have independently confirmed any new legislation passed after that date.

How do I avoid overpaying for a furnace replacement in Aubrey?

Get at least three itemized written quotes from licensed contractors. A quote that reads only “furnace install — $6,800” with no breakdown of equipment, labor, permits, and disposal is a red flag; reputable contractors itemize because the numbers hold up to scrutiny. Ask specifically about the brand and model being installed, the SEER2 and AFUE ratings, whether the permit is included, and what the warranty covers on both parts and labor.

A Final Note on Getting Quotes

Aubrey’s housing stock ranges from older homes near downtown to large planned developments with specific builder-standard equipment, and the right system size and configuration varies by home. No single price range fits every situation. The most reliable path is a written load calculation — not just a guess based on square footage — and at least three itemized bids from licensed, insured contractors who are willing to explain every line item. The companies listed here have verifiable histories in Aubrey and the surrounding area; start there, compare what you receive in writing, and make the decision that fits your home and your budget.